A common method of improving a home is to add space and value by carrying out a loft conversion.
As well as adding an extra room to the house, a well-insulated conversion may also provide savings by reducing energy bills. A better insulated loft area may result in a better EPC rating of the property, potentially adding more to the value of a house.
One of the key factors to consider when planning and carrying out a loft conversion is how it is to be insulated and what type of insulation to use as this can have a major impact on the living space available when the conversion is completed. When refurbishing an attic or loft space there is a requirement to comply with the appropriate Building Regulations / Standards for the location of the building.
In England, the required minimum U-value for pitched roofs insulated at rafter level is 0.18 W/m².K, whilst for flat ceilings the minimum is 0.16 W/m².K. These U-values also apply for conversions of existing roofs in Wales. However, if a complete re-roof is required on a Welsh property, it must be insulated to a minimum U-value of 0.15 W/m².K. For Scotland the U-values required are 0.15 W/m².K for new build and 0.18 W/m².K for refurbishments; these apply to both flat and pitched roofs.
More information on Building Regulations / Standards can be found here.
To achieve the required level of insulation without impacting greatly on the living space available, by either reducing the headroom or floor space, it is important to choose insulation that gives the best possible U-value for the minimum thickness.
So, to insulate a pitched roof for a loft conversion there are two main methods that we would recommend.
Existing roofs and shared roofs
For houses with shared roofs and where the roof covering is not being replaced, we suggest insulating between and under the rafters. This means putting a layer of insulation, like Kingspan Kooltherm K107 Pitched Roof Board, between the rafters and a second layer, usually an insulated plasterboard like Kingspan Kooltherm K118 Insulated Plasterboard, fixed beneath the rafters, which helps reduce thermal bridging.
This construction method is called a cold roof, as the rafters are not part of the warm insulated part of the structure. When adding the insulation to between the rafters there should be a 50mm ventilation gap above the insulation, between the insulation and the sarking felt. The insulation should be level with the bottom of the rafters. Then the insulated plasterboard should be fixed underneath this.
Dwarf walls
If there are any dwarf walls within the loft then these should also be insulated with a framing board such as Kingspan Kooltherm K107 between the timber studs and on the floor behind the dwarf wall, from the wall up to the edge of the roof in order to create a complete continuous insulation layer around the space.
Insulated plasterboard such as Kingspan Kooltherm K118 maybe be fitted to the inner face of the wall. This insulation will help to provide a continuous layer of insulation around the space, preventing unnecessary heat loss.
Re-roofing a detached property
If you are re-roofing a detached property then we suggest the best method would be to insulate ‘between and over’. This involves fixing insulation between the rafters and above the rafters.
This is called a warm roof as the majority of the insulation is above the timbers of the roof so the roofing timbers are insulated and therefore warm. A layer of insulation like Kingspan Kooltherm K107 Pitched Roof Board would be placed above the rafters, and a second layer of Kooltherm K107 between the rafters. One advantage of this is that it gives more headroom within the loft conversion. This method is only suitable when all the roofing is being completely removed as it requires access above the rafters.
For more information and advice on how to insulate a loft conversion, take a look at the following brochures:
Also have a play with our free online U-value Calculator, which allows you to check whether your build-up will meet Building Regulations / Standards.
To keep up to date with all our latest blog posts you can follow the blog by clicking this RSS Feed link or by following us on Twitter @KingspanIns_UK or on Linkedin.
Share this blog post with your friends and colleagues by clicking on the social media icons below.
The post How to insulate a loft conversion appeared first on Kingspan Insulation Blog.
from Kingspan Insulation Blog http://ift.tt/11IkMZQ
No comments:
Post a Comment